How to Lay Paving Stones in Concrete

How to Lay Paving Stones in Concrete

Laying paving stones in concrete gives them a permanence not found with sand or gravel bases. This is the preferred base for close-fitting paving stones arranged in specific patterns.
1 Lay Paving Stones  Step One
Remove turf and topsoil to a depth of the stone plus 2 inches. If you plan to park cars on the paved area, dig farther to allow for a 4-inch sub-base of crushed rock as well.
2 Lay Paving Stones  Step Two
Allow for drainage by creating a slight slope away from nearby buildings. A drop of 1/2 inch per yard is about right.
3 Lay Paving Stones  Step Three
Spread 1 inch of sand across the bottom of the area. (Add the sub-base of crushed rock first if applicable.)
granite fireplace Marble column Granite column Granite steps Granite building stone Granite flagstones Granite Setts stone fountain stone table bench 4 Lay Paving Stones  Step Four
Level the sand with a 2-by-4 by dragging the board's edge across the sand and frequently tamping it down.
5 Lay Paving Stones  Step Five
Position the stones and the borders in the sand. This is where they'll be when you're finished, so be precise when laying them out.
6 Lay Paving Stones  Step Six
Mix 1 part cement with 4 parts sand and add enough water to make a mortar.

 

How to Lay Paving Stones in Concrete